Input_Flow_Control; Input_Is_Activity; Input_Start_Char - Bay Networks 5390 Administering

hexadecimal number. The IP address always displays in decimal notation. This parameter has no
default.
input _ flow _ control
This asynchronous port parameter specifies the method of flow control for input received from a
device connected to an asynchronous port. Table C2-7 describes the valid options; the default is bell.

input_is_activity

This asynchronous port parameter defines activity as input. When enabled, the Model 5390 server
sets the inactivity timer when it receives input at the port. A Y enables this parameter, an N disables
it. The default is Y.
input _ start _ char
This asynchronous port parameter defines the control character sequence that restarts input if the
input_flow_control parameter is set to
start/stop. The default is
893-741-B
Table C2-7. Valid Options for the input_flow_control Parameter
Option Description
bell The Model 5390 server rings the terminal bell (sends
when its input buffer is full.
eia Flow control is delegated to a lower level. The control_lines
parameter must be set to flow control or both, and the device
must be wired appropriately.
start/stop Designates flow control by recognizing xon and xoff
characters. This action is independent of the control_lines
parameter setting.
none Disables flow control; characters are lost if the buffers
overflow.
.
CTRL-Q (^Q)
Configuration Parameters
)
^G
C2-27