Bay Networks 5390 Administering page 815

Table D1-1. All Parameters (continued)
Parameter
tdi_distance
tdi_framing
tdi_line_code
telnet_crlf
telnet_escape
term_var
tftp_dump_name
tftp_load_dir
time_broadcast
time_server
893-741-B
Values Default
an integer from 0
0 to 655
d4 or esf esf
ami or b8zs b8zs
Y or N N
control char. ^]
sequence
string ""
string host-
dependent
string host-
dependent
Y or N N
loopback 0.0.0.0
address, 0.0.0.0,
127.0.0.1, host
address,
broadcast
address
Description
T1 parameter that specifies the length, in
feet, of the cable from the Drop/Insert
interface to the PBX or other equipment.
T1 parameter that controls which super
frame format is used on the T1 Drop/Insert
Interface.
T1 parameter that selects the line code to
be used on the T1 Drop/Insert Interface.
When enabled, a carriage return translates
to a carriage return followed by a line feed;
when disabled, a carriage return translates
to a carriage return followed by a null
string.
Defines the character that returns the user
to the telnet prompt.
Identifies the type of terminal using the
CLI connection.
Provides the name of the file to use when
dumping the core image using tftp if the
Model 5390 operational image and erpcd
fail.
The string prepended to the image, motd,
and configuration file names for tftp
transfers.
Enables/disables broadcasting for a time
server host in case the preferred load host
is not available.
Determines whether or not the Model 5390
server queries for time service.
Software Reference
D1-19