Bay Networks 5390 Administering page 126

Communications server

Hide thumbs Also See for 5390:

Table of Contents

The Port Server and Rotaries

POSIX termios Field Deﬁnitions for TSTTY (continued)

PARENB/PARODD

The given baud rate is used to set the Model 5390

port baud rate. If the setting is read from the

Model 5390 server and there is no equivalent

POSIX speed, B50 is returned. Note that split

baud rates are not supported.

All character sizes (number of bits per character)

are supported.

Both 1 and 2 stop bits are supported. If this value

is read from the Model 5390 server, and the

Model 5390 server is set to 1.5 stop bits, this value

is returned as 1 stop bit.

Fully implemented.

Odd, even, and no parity are implemented. If the

settings are read from the Model 5390 server, and

there is no equivalent POSIX setting, the setting is

returned as no parity.

When set, the DTR line is dropped on close.

When set, the Model 5390 server will not respond

to modem control changes on this line.