Stty - Bay Networks 5390 Administering

Using the CLI Commands

stty

Using the stty command, which is similar to the UNIX stty command, you can display and change
port parameters that control terminal characteristics, CLI connection options, and special characters.
The syntax is:
stty [parameter [value]]
C3-62
Table C3-27. The stats -T Command Display (continued)
Field Description
Severely A Severely Errored Second (SES) is a second with 320 or
Errored more CRC error events or one or more OOFs.
Seconds
Unavailable Unavailable Seconds (UAS) are a count of one second
Seconds intervals during which service is unavailable.
Out of Frame An Out of Frame (OOF) event begins when any two of
Errors four consecutive frame synchronizing bits received from
the network interface are incorrect. An OOF state ends
when a reframe occurs.
BiPolar A BiPolar Violation (BPV) error event for an
Violations AMI-coded signal is the occurrence of a pulse of the same
polarity as the previous pulse. A BPV error event for a
B8ZS-coded signal is the occurrence of a pulse of the
same polarity as the previous pulse without being a part of
the zero substitution code.
CRC Errors A CRC error occurs when the CRC field calculated by the
customer installation, based on the incoming DS1 signal
does not agree with the CRC field contained in the DS1
signal received from the network.
Controlled A CS is the occurrence of a replication or deletion of a
Slips DS1 frame by the receiving terminal.
Receive The number of seconds with alarm events.
Network
Alarm
Seconds
893-741-B