Table D1-10. Asynchronous Port Parameters - Bay Networks 5390 Administering

Software Reference
Asynchronous Port Parameters
Table D1-10 lists Asynchronous Port parameters.

Table D1-10. Asynchronous Port Parameters

Parameter
allow_broadcast
allow_compression
arap_v42bis
at_guest
at_nodeid
at_security
attn_string
authorized_groups
autobaud
backward_key
D1-36
Values Default
Y or N Y
Y or N N
Y or N Y
Y or N N
0–253 0
Y or N N
control char. ""
sequence
virtual
CLI=^
enabled or all
disabled disabled
Y or N N
control char ""
sequence
Description
Permits the port to receive Model 5390
administrative broadcasts.
The Model 5390 server uses TCP/IP header
compression if the SLIP/PPP link's end point
also uses compression.
Enables V.42bis compression during an ARAP
session.
Allows guests to log into an ARAP service.
Defines the node ID given to an ARA client
during connection establishment.
Enables ACP service for the port.
Defines a control character sequence as an
attention character or string.
A
Specifies which remote group codes are
accessible to users on a particular Model 5390
port.
Determines whether or not the Model 5390
server automatically detects line speed when a
connection is opened, and whether or not it
sets matching terminal port characteristics on
the next login.
Reopens the next lower numbered session
already established at your port, from within
the current session without returning to local
mode.
893-741-B