Bay Networks 5390 Administering page 837

Table D1-10. Asynchronous Port Parameters (continued)
Parameter
net_inactivity_units
newline_terminal
output_flow_control
output_is_activity
output_start_char
output_stop_char
parity
phone_number
port_password
port_server_security
ppp_acm
ppp_ipx_network
893-741-B
Values Default
minutes or minutes
seconds
Y or N N
eia, start/stop
start/stop,
bell, both,
none
Y or N N
control char. ^Q
sequence
control char. ^S
sequence
even, odd, none
none
32-char string ""
<unset> or <unset>
a string
Y or N N
0x00000000 0x
to 0xffffffff 0000000
00000001 to randomly
ffffffff, generated
or 0 number
Description
Defines the units of time used for the port's
inactivity timer.
When enabled, a line feed terminates both the
input and the output line(s). When disabled, on
input, either a CR or a LF terminates the input
line; a CR followed by a LF terminates output
line(s).
Defines method of flow control that the
terminal uses to stop output from the
Model 5390 server.
Defines activity as output.
Defines the character that restarts output.
Defines the control character sequence that
stops output.
Defines the type of parity that the device uses.
The phone number for use with dynamic
dialing.
Defines a password for the port for use with
local password protection.
Enables/disables a host-based security policy
for access to a port via the port server.
Specifies which of the first 32 characters in a
TCP/IP packet will be escaped before being
sent to the network.
a 4-byte, Novell network number the
Specifies
Model 5390 server suggests for the remote PC
client on an IPXCP (IPX over PPP) link.
Software Reference
D1-41