Table C3-21. Arguments For The Queue Command; Queue - Bay Networks 5390 Administering

queue

The queue command displays information about queued HIC requests or removes a particular HIC
request from the queue. It is available only after LAT is configured. Table C3-21 describes the
arguments for queue. The syntax is:
queue [[[–h hostname] [–s service] [–p port]], [–r entry_id] [–v]]
893-741-B
Table C3-20. Model 5390 Processes (continued)
Process Purpose
syslog_port Logs messages to the port specified in the syslog_port
parameter.
telnet_cmd One pair per active telnet command.
telnet_rdr
telnetd_lis Listens for incoming Telnet requests.
telnetd_rdr One pair per active incoming Telnet session.
telnetd_wri
timed Maintains the Model 5390 time-of-day clock.
watcher Maintains the watchdog timer.

Table C3-21. Arguments for the queue Command

Argument Description
–h Displays only the entries originating from the hostname.
–s Displays only the entries requesting service.
–p Displays only the entries requesting connection to port.
–r Removes the entry associated with entry_id from the queue.
Do not combine this argument with another argument.
–v Displays the service_name and the port_number for each
queued service that is available.
Using the CLI Commands
C3-47