Summary Of All Parameters - Bay Networks 5390 Administering

Summary of All Parameters

Table D1-1 summarizes all of the configuration parameters.
Table D1-1. All Parameters
Parameter
a_router
acp_key
alarmsyslog
allow_broadcast
allow_compression
allow_snmp_sets
arap_v42bis
at_guest
at_nodeid
at_security
attn_string
authoritative_agent
893-741-B
Values Default
0–253 0
<unset> or <unset>
a string
Y or N Y
Y or N Y
Y or N N
Y or N N
Y or N Y
Y or N N
0–254 0
Y or N N
control char. ""
sequence
virtual
CLI=^
Y or N Y
Description
Defines the node ID of the network's
A_ROUTER.
Specifies a string for the Model 5390
server's encryption key; used for passing
messages between the Model 5390 server
and the ACP security server.
T1 parameter that enables or disables the
alarm event syslogs.
Permits the port to receive Model 5390
administrative broadcasts.
The Model 5390 server uses TCP/IP
header compression if the SLIP/PPP link's
end point also uses compression.
Enables/disables SNMP sets to the
Model 5390 server.
Enables V.42bis compression during an
ARAP session.
Allows guests to log into an ARAP
service.
Defines the node ID given to an ARA
client during connection establishment.
Enables ACP service for the port.
Defines a control character sequence as an
attention character or string.
A
Enables the Model 5390 server to reply to
an ICMP Address Mask Request.
Software Reference
D1-3