Bay Networks 5390 Administering page 691

The following command line requests that the Model 5390 server reboot an hour and fifteen minutes
from the time of entry:
annex# boot +1:15
bootfile: <cr>
warning: Shutting down for PM
893-741-B
Table C3-7. Arguments for the boot Command (continued)
Argument Description
–h Causes a diagnostics boot.
–l Boots the operational image and stores it onto local media; for
use with the stand-alone file system. Only ROM revisions
0601 and greater with the self-boot option loaded support –l.
–q Performs a boot without sending a warning message.
–r Uses the last loaded image name for rebooting.
time Defines the time for a shut down as either an offset +MM or
+HH:MM, or a clock time HH:MM.
filename Identifies the name of the file in which the Model 5390 image
is maintained. If you do not enter a file name, the Model 5390
server prompts for one. If you enter a blank line, the
Model 5390 server boots the image defined in the
image_name parameter. Pressing the Return key at the
prompt directs the Model 5390 server to boot the default file
name.
warning Allows an optional message (up to 249 characters) to be sent
to the users. This prompt appears only if the –q argument is
not specified.
Using the CLI Commands
C3-15