Bay Networks 5390 Administering page 88

Communications server

Hide thumbs Also See for 5390:

Table of Contents

Conﬁguring the Model 5390 Server

Conﬁguring LAT Services

The Model 5390 server can display, and connect to, currently available LAT services. Initially, all

LAT functions in the Model 5390 server are disabled as this feature is optional. To enable the LAT

functions, the network administrator must enter the correct lat_key parameter value and reboot the

Model 5390 server (see Configuring Hosts and Servers starting on page A14-1 for more details).

Conﬁguring the Model 5390 Server for AppleTalk

Initially, all AppleTalk functions in the Model 5390 server are disabled as this feature is optional.

To enable the AppleTalk functions, the network administrator must enter the correct option_key

parameter value and reboot the Model 5390 server (see AppleTalk starting on page A10-1 for more

Conﬁguring IPX

Initially, all IPX functions in the Model 5390 server are disabled as this feature is optional. To enable

the IPX functions, the network administrator must enter the correct option_key parameter value

and reboot the Model 5390 server (see Novell Networks starting on page A9-1 for more details).

NOTE: The lat_key is unique for each Model 5390 server. If you pur-

chased LAT, contact Bay Networks to obtain your value.

NOTE: The option_key is unique for each Model 5390 server. If you

purchased AppleTalk, contact your supplier to obtain a valid

option_key value.

NOTE: The option_key is unique for each Model 5390 server. If you

purchased IPX, contact your supplier to obtain a valid option_key