Bay Networks 5390 Administering page 813

Table D1-1. All Parameters (continued)
Parameter
sigproto
slip_allow_dump
slip_load_
dump_host
slip_mtu_size
slip_no_icmp
slip_ppp_security
slip_tos
speed
stop_bits
subnet_mask
(Model 5390)
893-741-B
Values Default
proto_in unset
proto_out
Y or N Y
Internet address 0.0.0.0
small or small
large
Y or N N
Y or N N
Y or N N
autobaud, 50, 9600
75, 110, 134.5,
150, 200, 300,
600, 1200,
1800, 2000,
2400, 3600,
4800, 7200,
9600, 19200,
38400, 57600,
115200
1, 1.5, 2 1
IP subnet mask 0.0.0.0
Description
T1 parameter that specifies the inbound
and outbound signaling protocols for each
DS0.
Enables/disables dumping across a SLIP
link.
Defines the host from which the
Model 5390 server receives a load or to
which the Model 5390 server dumps over
the SLIP link.
Forces SLIP interface to use large (1006)
or small (256) maximum transmission
units.
Discards any ICMP packets directed to the
SLIP link.
Enables/disables dialup SLIP/PPP access
via ACP.
When enabled, the Model 5390 server
sends interactive traffic before any other
traffic.
Defines the speed of the serial line
between the device and the Model 5390
server.
Specifies the number of bit time intervals
between successive characters.
Defines the Model 5390 IP subnet mask.
Software Reference
D1-17