Bay Networks 5390 Administering page 254

Dial-up Networking
For more details on dial-up SLIP, see Serial Line Internet Protocol (SLIP) starting on page A7-1.
For more details on dial-up PPP, see Point-to-Point Protocol (PPP) starting on page A8-1.
For more details on editing the configuration file, see Setting Up the Configuration File on page
A14-5.
For more details on Model 5390 configuration parameters, see Configuration Parameters starting
on page C2-1.
Sample Configurations for Dynamic Dialing
This section illustrates a final configuration for two Model 5390 servers configured for dynamic
dial-out routing.
Router A's dialout configuration:
%dialout
annex 132.245.1.1
begin_route 1
mode ppp
local 132.245.1.1
remote 132.245.2.1
set net_inactivity 20
phone 16175551234
set do_compression Y
set allow_compression Y
set net_inactivity_units minutes
set subnet_mask 255.255.255.0
set rip_sub_advertise Y
set rip_sub_accept Y
set rip_advertise
set rip_accept all
advertise y
ports 1
filter in exclu proto udp src_port router netact
filter out exclu proto udp src_port router netact
end_route
end
Router A's Port 1 (asy1) configuration (all other parameters at default values):
port asy1:
Port Generic Parameters
A11-8
all
893-741-B