Model 5390 Parameters - Bay Networks 5390 Administering

Table D1-1. All Parameters (continued)
Parameter
ipx_frame_type
ipx_security
ixany_flow_control
keep_alive_timer
lat_key
lat_queue_max
latb_enable
line_erase
load_broadcast
load_dump_gateway
load_dump_sequence
local_address
893-741-B
Values Default
ethernetII, raw802_3
raw802_3,
802_2,
802_2snap
Y or N N
Y or N N
10–255 20 seconds
unique value no default
1–255 or none 4
Y or N N
Y or N Y
Y or N Y
Internet address 0.0.0.0
net, slnn, self net
Internet 0.0.0.0
address
Description
Defines the framing used for IPX packets
on the Ethernet interface.
Controls whether or not IPX security is
enabled on the port.
Treats any input character as a start (XON)
character if output has been suspended by
a stop (XOFF) character.
The time interval, in seconds, between the
transmission of identification packets
during times of network inactivity.
Enables/disables the LAT protocol as well
as LAT-specific Model 5390 parameters.
Limits the number of HIC requests that the
Model 5390 server can queue.
Enables the Model 5390 server to decode a
LAT host's data-b packet.
Enables/disables echoing line erase for a
CRT.
Enables/disables broadcasting for files
other than the image if one or all are not
available.
Specifies the gateway's Internet address. A
gateway is required if the preferred load or
dump host is located on a different
network or subnet than the Model 5390
server.
Defines the network interface(s) for use
when loading and dumping.
Defines the Internet address for the port
(Model 5390 side of link).
Software Reference
D1-9