Bay Networks 5390 Administering page 250

Dial-up Networking
To determine which options are enabled, issue the CLI stats –o command:
annex: stats –o
KEYED OPTIONS:
MODULES DISABLED
2
Use na, admin, or SNMP to set the option_key parameter. For example, if your key value
is RaqbDwv8e , enter the following:
annex: su
Password:
annex# admin
Annex administration Remote Annex 10.1, 24 ports
admin: set annex option_key RaqbDwv8e
3
Reboot the Model 5390 server to put the option_key setting into effect:
q
admin:
boot
annex#
4
Reconnect to the Model 5390 server and issue the CLI stats -o command to make sure
dialout is keyed on.
5
Configure the modem section of the Model 5390 configuration file. Table A14-6. on
page A14-28 lists the field definitions for modem entries (for more details, see Creating
modem Entries in the Configuration File starting on page A14-26).
A11-4
dialout/RIP/filtering: keyed off
None
NOTE: T he MODULES DISABLED field indicates the current setting
of the disabled_modules parameter. If dial-out is listed as disabled, you
cannot use it, even if the option_key for it is set correctly (see
disabled_modules on page C2-21.) Although LAT is an option, you set
it using the Model 5390 lat_key parameter (for more details, see lat_key
on page C2-31).
LAT: keyed off
Atalk: keyed off
tn3270: keyed off
IPX: keyed off
893-741-B