Bay Networks 5390 Administering page 63

3
Execute the set annex command to change parameters.
The following sample command lines:
• Enable the DNS name server.
• Define two name server hosts.
• Enable security on the Model 5390 server.
• Define a security server host.
• Enable security for virtual CLI connections.
• Define an administrative password.
• Enable event logging.
• Define a CLI prompt.
command: set annex name_server_1 dns pref_name1_addr
command: 192.9.200.95 pref_name2_addr 192.9.200.85
command: enable_security Y vcli_security Y
command: pref_secure1_host 192.9.200.95
command: password piano syslog_mask all
command: syslog_host 192.9.200.95 cli_prompt "%a%c"
4
Execute the show annex all command to review your changes.
Using the example in step 3, the terminal displays:
command: show annex all
inet_addr:132.245.44.187
pref_load_addr:132.245.44.80
load_broadcast:N
load_dump_gateway:132.245.44.22
image_name: "oper.46.I9336"
"config.annex"
routed: Y
disabled_modules: vci
tftp_dump_name: ""
tcp_keepalive: 120
output_ttl: 64
893-741-B
Annex Generic Parameters
subnet_mask:255.255.255.0
pref_dump_addr:132.245.33.8
broadcast_addr:132.245.44.255
load_dump_sequence: net
motd_file: "motd"
authoritative_agent: Y
server_capability: none
tftp_load_dir: ""
ipencap_type: ethernet ip_forward_broadcast: N
option_key: "OHCg0C52T"session_limit: 1152
Configuring the Model 5390 Server
config_file:
A2-3