Enable_Security; Erase_Char; Erase_Line; Erase_Word - Bay Networks 5390 Administering

enable_security

This Model 5390 parameter activates the security system. To enable any security features, set this
parameter to Y. A Y enables this parameter, an N disables it. The default is N.

erase_char

This asynchronous port parameter defines a control character sequence for the CLI erase character.
The default is the Delete key (displayed as

erase_line

This asynchronous port parameter defines a control character sequence for the CLI line erase
character. The default is

erase_word

This asynchronous port parameter defines a control character sequence for the CLI word erase
character. The default is

facility_num

This Model 5390 parameter identifies a LAT host by number. Allowable values range from 0 to
32767. The default value is 0.

forward_key

This asynchronous port parameter specifies a character or string that reopens the next available,
higher numbered session already established at your port. When defining this value, use a unique,
unused character (such as Control F) or a string of characters. To clear an existing setting, enter a
null string (""). The default is no control character sequence.
893-741-B
^?
.
CTRL-U (^U)
.
CTRL-W (^W)
).
Configuration Parameters
C2-23