Lat_Key; Lat_Queue_Max; Latb_Enable - Bay Networks 5390 Administering

Communications server

Hide thumbs Also See for 5390:

Table of Contents

lat_key

This Model 5390 parameter restricts access to LAT-related Model 5390 commands, parameters,

functions, and the LAT protocol within the Model 5390 server. Each Model 5390 requires a unique

key value (contact your supplier to obtain a LAT key). After setting the key, your system

administrator must reboot the Model 5390 server.

This Model 5390 parameter limits the number of HIC requests that the Model 5390 server can

queue. This parameter affects only the operation of HIC requests received after changing the

parameter's value and setting LAT. Allowable values range from 1 to 255 or none (entering none

sets the value to 255). The default value is 4.

This asynchronous port parameter enables the Model 5390 server to decode a LAT hosts's data-b

packet. Data-b packets change certain asynchronous port parameters (see your LAT host's

documentation for more details). A Y enables this parameter, an N disables it. The default is N.

NOTE: If latb_enable is set to Y and the LAT host sends a data-b slot

message requesting that ﬂow control (XON/XOFF) be turned off, the

Model 5390 server turns off ﬂow control and passes XON/XOFF char-

acters to the host. This scenario can adversely affect both XON/XOFF

and the cursor keys on the terminal.

Conﬁguration Parameters