Bay Networks 5390 Administering page 846

Software Reference
Table D1-16. na Commands (continued)
Command Arguments
port | [port_set | keyword]
asynchronous
quit
read filename
reset annex [=annex_list] annex_subsystem
reset interface [=interface_list | keyword]
reset port | [=async_port_list | keyword]
asynchronous
reset t1 [ soft | hard | esf ]
set annex [=annex_list] annex_parameters
set interface [=interface_list]
interface_parameters
set port | [=port_list] port_parameters
asynchronous
show annex [=annex_list] [keyword |
annex_parameter]
show interface [=interface_list] [keyword |
interface_parameters]
show port | [=port_set] [keyword |
asynchronous port_parameter]
D1-50
Description
Groups asynchronous ports in a port_set,
allowing you to issue a single na command
to change values for all ports in the group.
This command is synonymous with the
asynchronous command.
Terminates the na session.
Reads and executes a script file.
Resets a subsystem without rebooting the
Model 5390 server.
Resets an interface parameter(s) without
rebooting the Model 5390 server.
Resets an asynchronous port parameter(s)
without rebooting the Model 5390 server.
T1 command used to reset the T1 engine
and ESF statistics.
Modifies the value of the Model 5390
parameter(s).
Modifies the value of an interface
parameter(s)
Modifies the value of an asynchronous port
parameter(s).
Displays the current value of the
Model 5390 parameter(s).
Displays the current value of an interface
parameter(s).
Displays the current value of an
asynchronous port parameter(s).
893-741-B