Bay Networks 5390 Administering page 835

Table D1-10. Asynchronous Port Parameters (continued)
Parameter
inactivity_timer
input_flow_control
input_is_activity
input_start_char
input_stop_char
ipso_class
ipx_security
ixany_flow_control
latb_enable
line_erase
local_address
location
login_port_password
893-741-B
Values Default
0–255 off
(0 = off)
eia, start/stop, bell
bell, none
Y or N Y
control char. ^Q
sequence
control char. ^S
sequence
top-secret, none
secret,
confidential,
unclassified,
none
Y or N N
Y or N N
Y or N N
Y or N Y
Internet 0.0.0.0
address
string ""
Y or N N
Description
Specifies the amount of time, in minutes, a port
can remain inactive before all sessions are
terminated and the port is reset.
Specifies the method of flow control for input
received from device connected to serial port.
Defines activity as input.
Defines the control character sequence that
restarts input.
Defines the control character sequence that
stops input.
Specifies the U.S. Department of Defense
basic IP Security Option (IPSO) classification
level included in TCP packets generated
locally on Model 5390 CLI, dedicated, or
adaptive asynchronous ports.
Controls whether or not IPX security is
enabled on the port.
Treats any input character as a start (XON)
character if output has been suspended by a
stop (XOFF) character.
Enables the Model 5390 server to decode a
LAT host's data-b packet.
Enables/disables echoing line erase for a CRT.
Defines the Internet address for the port on the
Model 5390 side of the link.
Defines a string that represents the port's
location.
Enables the port password when the VMS
command interface is configured (that is, when
cli_interface is set to vci).
Software Reference
D1-39