Bay Networks 5390 Administering page 193

6
Issue the stats command with no arguments and check to make sure the network
number is not displayed as 0 .
A network number of 0 indicates a misconfigured ipx_frame_type parameter or the absence
of an IPX server on the network.
Configuring Standards-based IPX (IPXCP)
The following sections describe:
• Configuring IPXCP dial-in.
• Configuring IPXCP routing.
Configuring IPXCP Dial-in
You can configure IPXCP dial-in for specific users and/or for specific Model 5390 ports. Configuring
for specific users allows you to deny or permit Model 5390 IPXCP dial-in access to a subset of
clients. Configuring on a per-port basis limits the Model 5390 ports that can accept dial-in IPXCP
packets.
893-741-B
NOTE: To disable IPX, set the Model 5390 disabled_modules parame-
ter to ipx and reboot the Model 5390 server. The stats –o command
should now display ipx in the DISABLED MODULES field (see Step 1).
Internetwork Packet Exchange (IPX) Protocol
A9-7