Bay Networks 5390 Administering page 682

Using the CLI Commands
C3-6
Table C3-2. Nonprivileged Model 5390 VMS Commands (continued)
Command Description
show Displays information about LAT services to which you can
service connect.
show Displays connected active sessions for your port.
sessions
show users Displays information about interactive port users on the
server.
Table C3-3. Privileged Model 5390 VMS Commands
Command
clear services
crash
define port access
define port
authorized groups
define port autobaud
define/set/change
port break
define/set/change port
character size
define port
CLI interface
define/set/change port
default session mode
define port dsrlogout
Description
Deletes entries for one or all local LAT services
from the operational database.
Performs a dump before rebooting.
Specifies the type of access allowed for the
device using the port.
Allows you to authorize that groups of LAT
service nodes be available to the port.
Sets automatic detection of the speed, parity, and
character size of the port device on login and sets
the Model 5390 port characteristics to match.
Specifies handling of the Break key during a
session.
Specifies the number of bits in data characters
exchanged between the port and the Model 5390
server.
Indicates CLI behavior as related to logging in,
passwords, inactivity timers and the port default
prompt.
Specifies the initial setting of the LAT session
mode.
When enabled, logs out of a port when the
attached device powers down.
893-741-B