Bay Networks 5390 Administering page 615

The parameter descriptions that follow are in alphabetical order. The Software Reference starting
on page D1-1 provides a series of tables that list the parameters in functional groupings.
893-741-B
Table C2-4. Keywords for the show t1 command (continued)
Keyword Description
tdi_framing Displays the super frame format used on the T1
Drop/Insert Interface as d4 (super frame) or esf
(extended super frame). The default is esf.
tdi_line_code Displays the T1 Drop/Insert Interface line code setting
as either ami or b8zs. The default is b8zs.
tni_circuit_id Displays the T1 circuit identifier string (120 characters
maximum) required by the service provider for
customer service calls.
tni_clock Displays parameter setting as loop, local, or external.
These values represent the source for the T1 clock.
tni_esf_fdl Displays parameter setting as ansi or att. These values
represent the Facilities Data Link standard.
tni_framing Displays parameter setting as d4 or esf. These values
represent the superframe format setting on the T1
Network Interface
tni_line_buildout Displays parameter setting as 0, 7.5, 15, or 22.5. These
values represent the cable loss measurement between
the last line generator and the customer location.
tni_line_code Displays parameter setting as ami or b8zs. These
values represent the line code used on the T1 Network
Interface.
tni_ones_density Displays the T1 Network Interface ones density setting
as on or off.
Configuration Parameters
C2-9