Table C3-27. The Stats -T Command Display - Bay Networks 5390 Administering

The stats -T current command display looks like this:
The information displayed from a stats -T command is described in
Table C3-27.
893-741-B
annex# stats -T current
alarm history:[no blue no red no yellow], Fri July 28 16:48:37 19
Alarms:
engine: offline no sync
serial number: 0811
circuit ID:
T1 info:
unit ID: XYLOGICS T1-ENGINE 085234 Rev. A 07/19/95 6343
loopback mode: No loopback uptime: 69:07:49
number of valid seconds:
bursty errored seconds (ESF only):0
errored seconds:
unavailable seconds:
out of frame errors:
CRC errors (ESF only):
received net alarms:
annex#

Table C3-27. The stats -T Command Display

Field Description
Sync When Sync is true, the T1 engine is detecting frame
synchronization. When Sync is false. the T1 engine has
lost frame synchronization and enters the red alarm state.
Loss of Signal When Loss of Signal is true, the T1 engine is not
detecting pulses on the T1 network interface receiver.
When Loss of Signal is false, the T1 network interface is
receiving pulses. The loss of signal condition causes the
T1 engine to transmit AIS (all ones unframed) on the T1
network interface.
no blue no red
no D&I sync no loss of signal
Current Statistics
469
Controlled slip seconds:0
0 Severely errored seconds:0
0
0 bipolar violations:0
0 controlled slilps:0
0
Using the CLI Commands
no yellow
C3-59