Bay Networks 5390 Administering page 125

The attributes for the port can be read or set using the various system calls defined for POSIX, or
their UNIX equivalents. Table A4-1 lists the fields from the POSIX termios definition that have
been implemented and their interactions. Flags not listed in this table are handled by software
modules on the host system, usually ldterm.
893-741-B
Table A4-1. POSIX termios Field Definitions for TSTTY
Field
c_cc
VSTOP
VSTART
c_iflag
IGNBRK
PARMRK
IXOFF
IXON
IXANY
ISTRIP
c_oflag
NLDLY/
CRDLY/
TABDLY/
BSDLY/
VTDLY/
FFDLY/
c_cflag
The Port Server and Rotaries
Description
Character to be used for stopping data in START/
STOP flow control mode
Character to be used for starting data in START/
STOP flow control mode.
When set, the Model 5390 server ignores breaks.
When set, characters with parity errors are
returned as a multi-byte sequence.
When set, input flow control is set to START/
STOP or both, depending on the default setup.
When set, output flow control is set to START/
STOP or both, depending on the default setup.
When set, any character restarts output.
When set, input characters are stripped to 7 bits,
otherwise all 8 bits are passed on.
The specified delay is done on the Model 5390
server by waiting for all output to be sent, then
starting the delay. Note: TAB3 is not a delay, and
will cause host action.
A4-19