Bay Networks 5390 Administering page 482

Using Model 5390 Security
10
Make sure that the system running erpcd has an alias of securid_0 in the /etc/hosts file
for the system that is running the ACE/Server. For example:
192.9.200.24 calvin securid_0
11
Run erpcd from the current directory or install the newly built erpcd in the /usr/annex
directory by entering:
# ./erpcd
or
# make install
# /usr/annex/erpcd
12
Follow the procedures in the ACE/Server documentation for registering clients and
users.
The hosts that have erpcd running must be registered as clients, and all users with SecurID
cards that will log into the Model 5390 server(s) must be allowed to access the host clients.
13
On the Model 5390 server, enable security, configure the preferred security server, and
enable CLI security on the ports to be protected by SecurID.
If you have a secondary server, the new erpcd must be installed on that host and that host must
be registered as a client in the
ACE/Server database.
A15-62 893-741-B