Bay Networks 5390 Administering page 683

893-741-B
Table C3-3. Privileged Model 5390 VMS Commands (continued)
Command
define/set/change port
flow control
define/set/change port
inactivity logout
define/set/change port
input flow control
define/set/change port
local switch
define/set/change
port username
define server
circuit timer
define server
inactivity timer
define server
keepalive timer
define server LAT key
define server lock
define server
login password
define server
login prompt
define server
maintenance password
Description
Specifies flow control.
Determines if the communications sever
automatically logs out of a port after a period of
inactivity.
Specifies input flow control.
Specifies a switch character that you can use to
reenter local mode from service mode.
Defines or changes a username assigned to a
port.
Specifies the frequency with which the server
communicates with service nodes when LAT
sessions are active.
Specifies the period of time after which the
server will log out of an inactive port.
Defines or changes the time interval at which the
server will transmit a keepalive message over a
LAT virtual circuit, when there is no other traffic
originating at the server.
Enables and disables the LAT protocol, and is
used as a security mechanism to restrict access to
LAT within the Model 5390 server.
Specifies whether or not interactive port users
can use the lock command.
Defines or changes the port password that
interactive users must type when logging in to a
server port.
Defines or changes the prompt that requests the
user's login password.
Defines or changes the user password required
for remote applications such as NCP and TSM.
Using the CLI Commands
C3-7