Bay Networks 5390 Administering page 746

Using the CLI Commands
C3-70
Table C3-29. Displaying Parameters Using stty (continued)
Parameter
control_lines
argument
none
flow
modem
both
idletimer time
isize value
signal value
Description
Displays the function of the hardware control lines.
The default is none. Possible values are:
The Model 5390 server ignores the hardware control
lines.
Configures CTS and RTS for flow control, but does
not activate hardware flow control.
Configures DTR, DCD, and DSR for asynchronous
modem control (see need_dsr on page C2-40).
Configures CTS, RTS, DTR, DCD, and DSR for
both flow control and modem control.
Displays the number of minutes in which the port
can be inactive before all sessions are terminated.
Displays the input buffer size in 240-byte blocks.
Displays the current state of the control lines
(specified in the control_lines parameter) in which a
plus (+) indicates the signal is asserted and a
minus (–) indicates the signal is not asserted.
893-741-B