893-741-B
Table C3-28. Setting Parameters Using the stty Command (continued)
Parameter
Description
%p
The port number.
%r
The string port.
%s
A space.
%t
The current time in 24-hour format, such as 13:59:42.
%u
The user name defined for the port or a null string.
stopb
Number of stop bits. Possible values are: 1, 1.5, and 2. The
argument
default is 1.
tabs
Specifies replacing output tab characters with spaces. If the
–tabs
terminal does not have hardware tab support, use –tabs. The
default is tabs.
term string
Identifies the type of terminal using the CLI connection. The
value should be a valid terminal type for the host.
tesc
Sets the Telnet escape character. This character returns you to
character
the telnet prompt when you are in a Telnet session with the
remote host. The default is
fwdtimer
Defines the time in hundredths of a second for the forwarding
time
timer. This timer causes data read from a serial port and stored
in a buffer to be forwarded to a host when it expires.
user name
Sets the user name for the connection.
wera
Sets the word erase character. The default is
character
Table C3-29. Displaying Parameters Using stty
Parameter
cliidletimer time
CTRL-
Description
Displays the number of minutes for a no jobs timer
in which the CLI hangs up when the last CLI session
exits.
Using the CLI Commands
].
CTRL-W
.
C3-69