Pref_Name1_Addr; Pref_Name2_Addr; Pref_Secure1_Host; Pref_Secure2_Host - Bay Networks 5390 Administering

Communications server

Hide thumbs Also See for 5390:

Table of Contents

Conﬁguration Parameters

pref_name1_addr

This Model 5390 parameter deﬁnes the IP address of the host speciﬁed in the name_server_1

parameter. The default is 0.0.0.0.

This Model 5390 parameter speciﬁes the IP address of the host speciﬁed in the name_server_2

parameter or a backup host that serves if name_server_2 is set to none. The default is 0.0.0.0.

This Model 5390 parameter speciﬁes the IP address of the security server to which the Model 5390

server ﬁrst sends security requests. This parameter works only if the enable_security parameter is

set to Y. The default is 0.0.0.0.

This Model 5390 parameter speciﬁes the IP address of the host that is the backup server if the host

speciﬁed in pref_secure1_host is not available. This parameter works only if the enable_security

parameter is set to Y. The default is 0.0.0.0.

This asynchronous port parameter speciﬁes the IP address or fully qualiﬁed domain name of a

machine running a Berkeley-style lpd server. The tn3270 command uses this server for the

print-screen function (for more details, see tn3270 on page C3-79).

This asynchronous port parameter speciﬁes the printer used by the tn3270 command's print-screen

function. You must enter a name listed in the

/etc/printcap ﬁle on the remote host by the printer_host parameter (for more details, see tn3270

on page C3-79).