Bay Networks 5390 Administering page 479

6
Set the Model 5390 parameter security_broadcast to N so that the Model 5390 server
does not inadvertently contact an ACP process that performs user authentication via
the acp_passwd file unless all the ACP server processes in your network are configured
and installed to do user authentication by calling the ACE/Server.
7
Set the Model 5390 parameter acp_key to its assigned value and enter this value into
the Model 5390 server's host file acp_keys.
Then ACP and the Model 5390 server exchange user names and passcodes encrypted with
the key.
8
Register valid Model 5390 users in the ACE/Server database with permissions
(individual or group) to access the ACP servers.
If two ACP servers are used, as each user must be allowed access to both servers since either
of them can authenticate a user by calling the ACE/Server host.
893-741-B
Using Model 5390 Security
A15-59