Bay Networks 5390 Administering page 803

Table D1-1. All Parameters (continued)
Parameter
force_CTS
forward_key
forwarding_count
forwarding_timer
group_value
hardware_tabs
(serial port)
host_table_size
image_name
imask_7bits
inactivity_timer
inet_addr
893-741-B
Values Default
Y or N N
string ""
0–255 0
0–255, off 0
enabled or all disabled
disabled
Y or N Y
1–255, 64
unlimited,
none
host file name ""
(up to 100
characters)
Y or N N
0–255 0 (off)
Internet address no default
Description
Controls the CTS (Clear to Send) signal on
a given port.
Reopens the next available higher
numbered session already established at
your port.
When set, the port will not forward
received characters until it receives the
specified number of characters.
Sets the amount of time, in tens of
milliseconds, that will elapse before
forwarding received data.
Security mechanism that restricts access to
LAT services for all users on the
Model 5390 server.
Allows the terminal to expand ASCII tab
characters if the terminal does not support
hardware tabs.
Sets the maximum number of entries in the
host table.
Specifies the name of the file containing
the Model 5390 operational code.
When enabled, the Model 5390 port
ignores the eighth bit of received
characters.
Specifies the amount of time, in minutes, a
port can remain inactive before all sessions
are terminated and the port reset.
Sets the Model 5390 Internet address.
Software Reference
D1-7