Configuring
Proprietary IPX
Ports
The following sections
describe how to
configure each type of
proprietary IPX port.
Examples in these
sections use the
superuser CLI admin
command (you can also
use the na utility); the
default superuser
password for the Model
5390 server is its IP
address.
Configuring ndp-mode
Ports
Although configuration
and management of an
ndp port is
accomplished primarily
through Annex DOS
Dial-out software, you,
as a UNIX administrator,
must:
1
Set the port
mode to ndp.
For example, to set
port 4 to ndp mode:
893-741-B
Internetwork Packet Exchange (IPX) Protocol
A9-21