Bay Networks 5390 Administering page 245

If, in Step 2, you selected V1/Autodetect Delay, configuration is complete. Skip to Running the
Application , below.
If you selected either CLI security or both, and you have modified the CLI prompt and/or the
ACP Policy file on the Model 5390 server, you must use the CCL Converter's Customize menu
to configure the Macintosh for any prompts you changed on the Model 5390 server.
For example, Model 5390 administrators typically change the CLI prompt - suppose your
customized Model 5390 prompt is the Model 5390 name followed by the port number. Under
Customize on the Macintosh, select the CLI Prompt... menu item. A dialog box now appears.
In the dialog box, enter the Model 5390 name portion of the Model 5390 prompt, but not the
893-741-B
Table A10-7. Selecting Security Type (continued)
CCL Setting
CLI Security
ARAP V1/Autodetect
Delay and CLI
Security
CLI Security
ARAP V1/Autodetect
Delay and CLI
Security
CLI Security
ARAP V1/Autodetect
Delay and CLI
Security
Port Parameter
Settings
mode: cli or
auto_detect
at_security=N
mode: cli or
auto_detect
at_security=N
mode: cli or
auto_detect
at_security=Y
mode: cli or
auto_detect
at_security=Y
mode: arap
mode: arap
AppleTalk
Security Result
Normal (non-ARAP)
ACP security,
including port
password and
SecurID, if
configured.
Normal (non-ARAP)
ACP security,
including port
password and
SecurID, if
configured.
Both ARAP ACP
security and normal
(non-ARAP) security.
Both ARAP ACP
security and normal
(non-ARAP) security.
Connection fails.
Connection fails.
A10-21