Default_Session_Mode; Dialup_Addresses; Disabled_Modules - Bay Networks 5390 Administering

Configuration Parameters

default_session_mode

This asynchronous port parameter defines the default session mode when the VMS interface is
configured (that is, when cli_interface is set to vci). Valid options are interactive, passthru, passall,
or transparent. The default is interactive.

dialup_addresses

This asynchronous port parameter enables the Model 5390 server to request an end point address
from the host-based security server based on a user's login and/or port number. This parameter
works only when the mode parameter is set to slip or ppp. A Y enables this parameter, an N disables
it. The default is N.

disabled_modules

This Model 5390 parameter allows you to disable individual software modules to free memory
space. If you enter more than one module, separate module names using commas. Valid options are
admin, atalk, dialout, edit, fingerd, ftpd, ipx, lat, nameserver, ppp, slip, snmp, tn3270, tstty,
vci, all, or none. The default is vci (disables the Model 5390 VMS interface).
893-741-B C2-21