Bay Networks 5390 Administering page 252

Dial-up Networking
annex# admin
Annex administration Remote Annex 10.1, 24 ports
admin: reset annex modem
7
Configure the dialout section of the Model 5390 configuration file. Table A14-9. on page
A14-37 provides field definitions for the dialout entries.
Each entry in the dialout section of the configuration file defines a dial-out route. The format
of a dialout entry looks like this:
%dialout
global_timeout <time-out value>
# this is a comment line
begin_route
local
remote
mode
ports
phone
chat
filter
disabled
advertise
set
set
end_route
The mandatory fields for a dialout entry are: begin_route , remote , mode (slip or ppp), ports ,
phone , and end_route .
Using separate set field entries, set any port parameters that you want included in the dialout
entry (for more details, see
Table A14-10. on page A14-40).
A11-6
<route id>
<local address>
<remote address>
<slip or ppp>
<port set/rotary>
<phone number>
<chat script list>
<filter command>
<time interval>
<Y or N>
<parameter_name setting>
<parameter_name setting>
NOTE: Any port parameter not set in the dialout entry will use the cur-
rent settings in nonvolatile memory.
893-741-B