Bay Networks 5390 Administering page 461

The following is an excerpt from an acp_userinfo file.
user zelda
accesscode ipx
phone_no 9-1-212-555-0264
phone_no 9-555-0590
in_pool mktg_inpool
out_pool mktg_outpool
end
end
pool mktg_inpool
ports19-24@stratplan
ports 8-10@marcom
end
pool mktg_outpool
ports3-4@stratplan
ports5,6@marcom
end
In the preceding example:
• User zelda is configured so she can choose to be dialed back at either 9-1-212-555-0264 or
9-617-555-0590. Using the FLSETUP program, she can specify an actual phone number or
an integer (from 01 to 09) indicating the number's position in the acp_userinfo list. For
example, she can enter 9-555-0590 or she can enter 02 (see the documentation for the
FastLink II Client Pack).
• If zelda dials into port 19, 20, 21, or 24 on stratplan, zelda is dialed back from port 3 or 4 on
stratplan or port 5 or 6 on marcom.
• If zelda dials into port 8, 9, or 10 on marcom, she is dialed back from port 3 or 4 on stratplan
or port 5 or 6 on marcom.
• If zelda dials into any other port on any other Model 5390 server, she is connected
immediately rather than dialed back.
• If zelda is configured for dial-back but does not specify a call-back number via FastLink II
software, she is denied access to the Model 5390 server.
893-741-B
NOTE: Users need not be concerned about what ports the Model 5390
server uses for dial-in or dial-back. Users need to know only the phone
numbers they can dial into or the sequence numbers they can enter
(which you must tell them before they use FastLink II software).
Using Model 5390 Security
A15-41