Group_Value; Hardware_Tabs (Asynchronous); Host_Table_Size; Image_Name - Bay Networks 5390 Administering

Communications server

Hide thumbs Also See for 5390:

Table of Contents

Conﬁguration Parameters

group_value

This Model 5390 parameter speciﬁes the LAT protocol remote group codes that can access local

services offered by the Model 5390 server. To access these services, the Model 5390 server must

have at least one enabled group code that matches the service's group codes. Valid options are all,

none, a series of numbers between 0 and 255 separated by commas, or a range of numbers between

0 and 255 separated by dashes, followed by enabled or disabled. The default is all disabled.

This asynchronous port parameter allows the Model 5390 server to convert ASCII tab characters to

the correct number of spaces when a terminal does not support hardware tabs. This occurs only at

the CLI level. A Y enables this parameter, an N disables it. The default is Y.

This Model 5390 parameter deﬁnes the number of entries allowed in the host table. Allowable values

range from 0 to 255. Entering 255 allows an unlimited number of entries; entering 254 indicates

that there is no host table. In this case, the Model 5390 server requires a name server to resolve

every host name. The default is 64.

This Model 5390 parameter deﬁnes the ﬁle name containing the operational code that loads by

default when you boot the Model 5390 server. The string size ranges from 0 to 100 characters. The

default is a null string ("").