Bay Networks 5390 Administering page 833

Table D1-10. Asynchronous Port Parameters (continued)
Parameter
banner
broadcast_direction
char_erase
cli_imask7
cli_inactivity
cli_interface
cli_security
connect_security
control_lines
data_bits
dedicated_address
dedicated_arguments
893-741-B
Values Default
Y or N Y
network or port
port
Y or N Y
Y or N N
0– 254 or 0 (off)
immediate
vci or uci uci
Y or N N
Y or N N
modem_ none
control,
flow_
control,
both, none
5, 6, 7, or 8 8
Internet 0.0.0.0
address
100-char. ""
string
Description
Enables/disables the Model 5390 banner and
message-of-the-day.
Defines the direction of administrative
broadcasts for slave ports.
Enables/disables echoing character erase for a
CRT.
Enables/disables masking CLI input to seven
bits.
Sets the amount of time that the Model 5390
server waits before hanging up the port after it
becomes idle.
Allows you to control the prompt that appears
for VMS or UNIX environments.
Enables/disables CLI security for the
Model 5390 server.
Enables/disables the host-based security policy
for access from the CLI to the network.
Specifies the type of hardware control lines
used on the port.
Defines the number of data bits in a character;
does not include start, stop, or parity bits.
Defines the host to which a dedicated port
connects.
Defines the command line arguments used for
dedicated ports. Use with the mode and
dedicated_port parameters.
Software Reference
D1-37