Bay Networks 5390 Administering page 680

Using the CLI Commands
C3-4
Table C3-1. CLI Commands (continued)
Command Type
stats –c superuser
stats –T user
stty user
su superuser
t1_loopba superuser
ck
tap superuser
telnet user
tn3270 user
tstty superuser
who user
Description
Clears all serial line statistics to zero.
Displays T1 network interface statistics.
Displays and modifies CLI port parameters.
Enters and exits superuser administrative
mode.
Places the T1 engine in loopback mode.
Displays input and output for a serial port.
Connects to a host using the Telnet protocol.
Connects to an IBM VM/CMS or MVS host
using the tn3270 variation of the Telnet
protocol. This command is available only if the
network administrator has set the option_key
parameter to the correct value.
Connects to the specified host using the
TSTTY protocol.
Displays Model 5390 users.
893-741-B