Related Manuals for Bay Networks 3395
Summary of Contents for Bay Networks 3395
- Page 1 Model 3395/3395A Terminal Server Software License Installation Guide 893-248-D January 1995...
- Page 2 © 1995 by Bay Networks, Inc. All rights reserved. SynOptics and SynOptics Communications are registered trademarks of Bay Networks, Inc. Lattis System 3000 and Bay Networks are trademarks of Bay Networks, Inc. Other brand and product names are registered trademarks or trademarks of their respective holders.
-
Page 3: Product Description
Product Description You have purchased a software license to install an upgrade to your terminal server software. ® SynOptics software option and upgrade products protect your Lattis ™ System 3000 investment by allowing you to keep your system up to date. -
Page 4: Gathering Information
Gathering Information Before contacting the Password Hotline, have available the license number on your license certificate and the last six alphanumeric characters of the MAC address of the device. The MAC address is printed on the label of the module’s shipping box and on the front panel of the module. - Page 5 If you make a rush request and FAX your request to Bay Networks between 6 AM and 4 PM Pacific Standard Time on business days, Bay Networks will FAX your passwords within two hours. If your rush request is received outside of these hours, Bay Networks will reply by 8 AM Pacific Standard Time on the next business day.
-
Page 6: Record Keeping
Requesting the Password by Phone You may also call the Password Hotline for your password(s) during business days between 6 AM and 5 PM Pacific Standard Time. Before you call, have a pencil and your license certificate at hand so that you can record your password on your license certificate. - Page 7 To install software requiring a password, you use the appropriate DEFINE SERVER PROTOCOL command. You can access this command using a Telnet connection or through the terminal server port. Follow these steps: 1. At the non-privileged user prompt, enter the SET PRIV command to set the privilege level to privileged (the default non-privileged prompt is TS3395>):...
-
Page 8: Password Problems
NOTE: If you are running Model 3395 software version 3.x and enable LAT, the Telnet protocol stays enabled. If you are running Model 3395 software version 4.0 or later, have 1 megabyte (MB) of memory in your terminal server, and enable LAT, the Telnet protocol is disabled to save memory. - Page 9 The Merged Company of SynOptics and Wellfleet Bay Networks, Inc Corporate Headquarters 4401 Great America Parkway Santa Clara, CA 95054 January 1995 ™ 8 Federal Street Billerica, MA 01821...