Manual Changes Introduction - Agilent Technologies 4286A User Manual

Manual Changes
Introduction
This appendix contains the information required to adapt this manual to earlier versions or
con gurations of the meter than the current printing date of this manual. The information in
this manual applies directly to the 4286A RF LCR meter serial number pre x listed on the title
page of this manual.
Manual Changes
To adapt this manual to your 4286A, see Table A-1 and Table A-2, and make all the manual
changes listed opposite your instrument's serial number and rmware version.
Instruments manufactured after the printing of this manual may be di erent from those
documented in this manual. Later instrument versions will be documented in a manual
changes supplement that will accompany the manual shipped with that instrument. If your
instrument's serial number is not listed on the title page of this manual or in Table A-1, it may
be documented in a yellow MANUAL CHANGES supplement.
In additions to change information, the supplement may contain information for correcting
errors (Errata) in the manual. To keep this manual as current and accurate as possible,
Agilent Technologies recommends that you periodically request the latest MANUAL CHANGES
supplement.
For information concerning serial number pre xes not listed on the title page or in the
MANUAL CHANGE supplement, contact the nearest Agilent Technologies oce.
Turn on the line switch or execute the *IDN? command by GPIB to con rm the rmware
version. See the GPIB Command Reference manual for information on the *IDN? command.
Serial Pre x or Number
Version
Table A-1. Manual Changes by Serial Number
Table A-2. Manual Changes by Firmware Version
Make Manual Changes
Make Manual Changes
Manual Changes
A
A-1