Subaru Legacy 2005 Service Manual page 1203

3) Install the hood stay holder (B).
4) Install the mounting bolts to radiator main fan
motor assembly.
5) Install the reservoir
CO(H4DOTC)-30, INSTALLATION,
Tank.>
6) Install the over flow pipe.
7) Connect the over flow hose.
8) Install the air intake duct.
9) Lift-up the vehicle.
10) Install the ATF hose to the clip of radiator main
fan motor assembly.
11) Install the heat shield cover to radiator. (Model
without ATF warmer)
Radiator Main Fan and Fan Motor
(A)
(B)
CO-00255
CO-00259
tank. <Ref.
Reservoir
CO-00250
CO(H4DOTC)-25
12) Connect the main fan motor connector (A).
13) Install the under cover.
14) Lower the vehicle.
15) Connect the ground cable to battery.
to
16) Fill engine coolant.
<Ref. to CO(H4DOTC)-13, FILLING OF ENGINE
COOLANT, REPLACEMENT, Engine Coolant.>
17) Install the collector cover.
C: DISASSEMBLY
1) Remove the clip which holds fan motor connec-
tor onto shroud.
2) Remove the nut which holds fan itself onto fan
motor and shroud assembly.
COOLING
(A)
CO-00251
IN-00203
CO-00102