Subaru Legacy 2005 Service Manual page 1226

LUBRICATION
Tightening torque:
⋅
85 N m (8.7 kgf-m, 62.7 ft-lb)
8) Install the front exhaust pipe. <Ref. to
EX(H4DOTC)-5, INSTALLATION, Front Exhaust
Pipe.> <Ref. to EX(H4SO 2.0)-7, INSTALLATION,
Front Exhaust Pipe.>
9) Install the under cover.
10) Lower the vehicle.
CAUTION:
When lowering the vehicle, lower the lift-up de-
vice and wire ropes at the same time.
11) Remove the lifting device and wire ropes.
12) Install the pitching stopper.
Tightening torque:
⋅
T1: 50 N m (5.1 kgf-m, 36.9 ft-lb)
⋅
T2: 58 N m (5.9 kgf-m, 42.8 ft-lb)
T2
13) Install the linear motion mounting.
<Ref. to ME(H4DOTC)-38, INSTALLATION, Linear
Motion Mounting.>
Oil Pan and Strainer
LU-02023
LU-00222
T1
LU-00224
LU(H4DOTC)-16
14) Install the radiator upper brackets.
15) Install the intercooler. <Ref. to IN(H4DOTC)-
12, INSTALLATION, Intercooler.>
16) Install the air intake boot and air cleaner upper
cover.
17) Connect the connector to mass air flow sensor.
18) Install the front wheels.
19) Install the collector cover.
20) Connect the ground cable to battery.
21) Fill engine oil. <Ref. to LU(H4DOTC)-9, IN-
SPECTION, Engine Oil.>
C: INSPECTION
Visually check that the oil pan, oil strainer, oil
strainer stay and baffle plate are not damaged.
CO-00040
LU-00220
IN-00203