Table of Contents
Advertisement
LUBRICATION
5. Oil Pan and Strainer
A: REMOVAL
1) Set the vehicle on a lift.
2) Remove the front wheels.
3) Remove the collector cover.
4) Disconnect the ground cable from battery.
5) Disconnect the connector from mass airflow
sensor.
6) Remove the air intake boot and air cleaner upper
cover.
7) Remove the intercooler.
<Ref. to IN(H4DOTC)-12, REMOVAL, Intercool-
er.>
8) Remove the pitching stopper.
9) Remove the linear motion mounting.
<Ref. to ME(H4DOTC)-38, REMOVAL, Linear Mo-
tion Mounting.>
Oil Pan and Strainer
10) Remove the radiator upper brackets.
11) Support the engine with a lifting device and
wire ropes.
IN-00203
12) Lift-up the vehicle.
CAUTION:
When lifting up the vehicle, raise up wire ropes
at the same time.
13) Remove the under cover.
14) Drain the engine oil.
15) Remove the front exhaust pipe.
LU-00220
<Ref. to EX(H4DOTC)-5, REMOVAL, Front Ex-
haust Pipe.>
16) Remove the nuts which install front cushion
rubber onto front crossmember.
LU-00221
17) Remove the bolts which install oil pan on cylin-
der block with the engine raised up.
18) Insert the oil pan cutter blade into the gap be-
tween cylinder block and oil pan.
CAUTION:
Do not use a screwdriver or similar tool in place
of oil pan cutter.
19) Remove the oil strainer.
LU(H4DOTC)-14
CO-00040
LU-00222
LU-02023
Advertisement
Chapters
Table of Contents
