Sense:sp[1-1]:Detector:function; Sense:sp[1-1]:Frequency:center - Agilent Technologies E5052A Programmer's Manual

Preset value
Unit
Resolution
Equivalent key
SP Menu -> Start/Center -> Carrier To -> Carrier -> Center
SP Menu -> Start/Center -> Carrier To -> Carrier x2 -> Center
SP Menu -> Start/Center -> Carrier To -> Carrier x3 -> Center
SP Menu -> Start/Center -> Carrier To -> Carrier x# -> Center
SP Menu -> Stop/Span -> Carrier To -> Carrier -> Center
SP Menu -> Stop/Span -> Carrier To -> Carrier x2 -> Center
SP Menu -> Stop/Span -> Carrier To -> Carrier x3 -> Center
SP Menu -> Stop/Span -> Carrier To -> Carrier x# -> Center

:SENSe:SP[1-1]:DETector:FUNCtion

Syntax :SENSe:SP[1-1]:DETector:FUNCtion {POSitive|SAMPle}
:SENSe:SP[1-1]:DETector:FUNCtion?
Description Sets/Reads detector mode
Parameter
POSitive(Preset
value)
SAMPle
Equivalent key SP Menu -> Format -> Detector Mode

:SENSe:SP[1-1]:FREQuency:CENTer

Syntax
:SENSe:SP[1-1]:FREQuency:CENTer <numeric>
:SENSe:SP[1-1]:FREQuency:CENTer?
Description
Sets/Reads the center value of frequency span
Parameter When the E5052A is used stand-alone, or with the downconverter turned off
(Allowable setting range varies depending on whether the frequency offset is on or off
, the LO frequency within the frequency offset, and the conversion mode used in the
7
:SENSe:SP[1-1]:DETector:FUNCtion
<Numeric>
-
-
1
Description
Set detector mode to 'POSitive'
Set detector mode to 'SAMPle'
SCPI Command Reference
315