Acx7100-32C Routers Hardware And Cli Terminology Mapping - Juniper ACX7100-32C Hardware Manual

ACX7100-32C Routers Hardware and CLI Terminology Mapping

Table 2 on page 7 describes the hardware terms used in ACX7100-32C router documentation and the
corresponding terms used in the Junos OS CLI.
Table 2: CLI Equivalents of Terms Used in Documentation for ACX7100-32C Routers
Hardware Description (as
Item (as Displayed in the CLI)
Displayed in
the CLI)
Chassis JNP7100-32C
[ACX7100-32C]
Routing RE-JNP-7100
Engine
n
FPC Abbreviated name of
the Flexible PIC
Concentrator (an FPC is
equivalent to a line card)
n
PIC Abbreviated name of
the PIC
xcvr n Abbreviated name of
the transceiver
Value (as Displayed Item in
in the CLI) Documentation
– Router chassis
– Built-in Routing
Engine
n is
The value of The router does not
always 0. have actual FPCs. In
this case, FPC refers
to the router itself.
The value of n is The router does not
always 0. have physical PICs
The built-in network
ports on the front
panel of the router
are mapped to logical
PICs.
The value of n is the Optical transceivers
number of the port
in which the
transceiver is
installed.
Additional
Information
"Chassis Physical
Specifications for
ACX7100-32C
Routers" on page
34
–
Interface Naming
Conventions Used in
the Junos OS
Operational
Commands
Interface Naming
Conventions Used in
the Junos OS
Operational
Commands
–
7