Gps Status - Leica iNEX User Manual

3.3.6 AutoSPRAY Status
The AutoSPRAY Status Button will only be
shown if AutoSPRAY has been enabled on
the iNEX. When it is displayed it will be
shown in one of four colours. Green
represents AutoSPRAY as ON and
functioning normally; Orange when
AutoSPRAY override is functioning; White
when AutoSPRAY is OFF and Grey when
there is an AutoSPRAY error.
Pressing on the AutoSPRAY Status Button will turn the AutoSPRAY ON/OFF
and can be used to temporarily suspend AutoSPRAY control. Holding the
AutoSPRAY Status Button down for four seconds will provide access to the
AutoSPRAY override menu.

3.3.7 GPS Status

The GPS Status displays the health of the
GPS position information. When the system
is operating normally a continually scrolling
satellite will be displayed. Touching on this
area will display a screen with more detailed
information about the GPS Status. Other
display states are described in section 3.6.1
Checking the GPS Status
3.3.8 AutoSTEER Status
The AutoSTEER Status is displayed when
AutoSTEER has been enabled and setup on
the iNEX. It displays the readiness of the
steering system to engage or when the
steering is engaged. Pressing the button
will engage & disengage steering when at
the appropriate readiness level. Holding
the button down for four seconds will
provide access to more advanced functions.
Page 15 Rev 2
iNEX User Manual