Data In The "Drive Object (Function Module)" Field - Siemens SINAMICS G150 Manual

A parameter can belong to a single, multiple, or all drive objects.
The following information relating to "Drive object" and "Function module" can be displayed
under the parameter number:
Table 2-1

Data in the "Drive object (function module)" field

Drive object (function
module)
All objects
B_INF
B_INF (parallel)
B_INF (Brk Mod Ext)
B_INF (Cooling unit)
B_INF (PROFINET)
CU_G130_DP
CU_G130_DP (CAN)
CU_G130_DP
(COMM BOARD)
CU_G130_DP
(PROFINET)
CU_G130_PN
CU_G130_PN (CAN)
CU_G130_PN
(COMM BOARD)
CU_G130_PN
(PROFINET)
CU_G150_DP
CU_G150_DP (CAN)
CU_G150_DP
(COMM BOARD)
CU_G150_DP
(PROFINET)
CU_G150_PN
CU_G150_PN (CAN)
CU_G150_PN
(COMM BOARD)
CU_G150_PN
(PROFINET)
ENC
SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
Type
- This parameter is used by all drive objects.
30 Basic Infeed closed loop control
Unregulated line infeed unit (without regenerative feedback) for rectifying the line
voltage of the DC link.
- Basic Infeed with "Parallel connection" function module (r0108.15).
- Basic Infeed with "Braking Module external" function module (r0108.26).
- Basic Infeed with "Cooling unit" function module (r0108.28)
- Basic Infeed with "PROFINET" function module (r0108.31).
Control Unit SINAMICS G130 with PROFIBUS interface.
- Control Unit SINAMICS G130 with PROFIBUS interface and function module "CAN"
(p0108.29).
Control Unit SINAMICS G130 with PROFIBUS interface and "COMM board" function
module (p0108.30 ).
- Control Unit SINAMICS G130 with PROFIBUS interface and function module
"PROFINET" (p0108.31).
Control Unit SINAMICS G130 with PROFINET interface.
- Control Unit SINAMICS G130 with PROFINET interface and function module "CAN"
(p0108.29).
Control Unit SINAMICS G130 with PROFINET interface and "COMM board" function
module (p0108.30 ).
Control Unit SINAMICS G130 with PROFINET interface and function module
"PROFINET" (p0108.31).
Control Unit SINAMICS G150 with PROFIBUS interface.
- Control Unit SINAMICS G150 with PROFIBUS interface and function module "CAN"
(p0108.29).
Control Unit SINAMICS G150 with PROFIBUS interface and "COMM board" function
module (p0108.30 ).
- Control Unit SINAMICS G150 with PROFIBUS interface and function module
"PROFINET" (p0108.31).
Control Unit SINAMICS G150 with PROFINET interface.
- Control Unit SINAMICS G150 with PROFINET interface and function module "CAN"
(p0108.29).
Control Unit SINAMICS G150 with PROFINET interface and "COMM board" function
module (p0108.30 ).
Control Unit SINAMICS G150 with PROFINET interface and function module
"PROFINET" (p0108.31).
300 Object for a DRIVE-CLiQ encoder.
2.1 Overview of parameters
Meaning
2 Parameters
19