Mot_Temp_Mod Rotor Temperature / Mod Rotor Temp; Q Flux Flux Constant Unsaturated / Psiq Kpsi Unsat; Q Flux Quadrature Axis Current Constant Unsaturated / Psiq Kiq Unsat; Q Flux Direct Axis Current Constant Unsaturated / Psiq Kid Unsat - Siemens SINAMICS G150 Manual

2 Parameters
2.2 List of parameters
r0633[0...n]

Mot_temp_mod rotor temperature / Mod rotor temp

VECTOR_G Can be changed: -
Data type: FloatingPoint32
P-Group: Motor
Not for motor type: REL, FEM
Min
- [°C]
Description: Displays the rotor temperature of the motor temperature model (model 2).
Note: For motor temperature model 3 (p0612.2 = 1), this parameter is not valid:
p0634[0...n]

Q flux flux constant unsaturated / PSIQ KPSI UNSAT

VECTOR_G Can be changed: C2(3), U, T
Data type: FloatingPoint32
P-Group: Motor
Not for motor type: ASM, FEM
Min
0.000 [Vsrms]
Description: The non-linear and cross-coupled quadrature axis flux functions are defined using 4 coefficients.
The parameter weights the unsaturated component of the quadrature axis flux function.
p0635[0...n]

Q flux quadrature axis current constant unsaturated / PSIQ KIQ UNSAT

VECTOR_G Can be changed: C2(3), U, T
Data type: FloatingPoint32
P-Group: Motor
Not for motor type: ASM, FEM
Min
0.00 [Arms]
Description: The non-linear and cross-coupled quadrature axis flux functions are defined using 4 coefficients.
This parameter describes the interdependency of the unsaturated component of the quadrature axis current.
Dependency: Refer to: p0634
p0636[0...n]

Q flux direct axis current constant unsaturated / PSIQ KID UNSAT

VECTOR_G Can be changed: C2(3), U, T
Data type: FloatingPoint32
P-Group: Motor
Not for motor type: ASM, FEM
Min
0.00 [Arms]
Description: The non-linear and cross-coupled quadrature axis flux functions are defined using 4 coefficients.
This parameter describes the interdependency of the unsaturated component of the direct axis current.
Dependency: Refer to: p0634
p0637[0...n] Q flux flux gradient saturated / PSIQ Grad SAT
VECTOR_G Can be changed: C2(3), U, T
Data type: FloatingPoint32
P-Group: Motor
Not for motor type: ASM, FEM
Min
0.00 [mH]
Description: The non-linear and cross-coupled quadrature axis flux functions are defined using 4 coefficients.
This parameter describes the gradients of the saturated component over the quadrature axis current.
228
Calculated: -
Dyn. index: MDS, p0130
Units group: 21_1
Scaling: p2006
Max
- [°C]
Calculated: -
Dyn. index: MDS, p0130
Units group: -
Scaling: -
Max
100.000 [Vsrms]
Calculated: -
Dyn. index: MDS, p0130
Units group: -
Scaling: -
Max
10000.00 [Arms]
Calculated: -
Dyn. index: MDS, p0130
Units group: -
Scaling: -
Max
10000.00 [Arms]
Calculated: -
Dyn. index: MDS, p0130
Units group: -
Scaling: -
Max
10000.00 [mH]
List Manual (LH2), 04/2014, A5E03263479A
Access level: 4
Func. diagram: 8017
Unit selection: p0505
Expert list: 1
Factory setting
- [°C]
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0.000 [Vsrms]
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0.00 [Arms]
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0.00 [Arms]
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0.00 [mH]
SINAMICS G130/G150