Bit Field; Dependency; Safety Guidelines - Siemens SINAMICS G150 Manual

Index
The name and meaning of each individual index is specified for indexed parameters.
The following applies to the values (Min, Max, Factory setting) for indexed adjustable
parameters:
• Min, Max:
• Factory setting:

Bit field

For parameters with bit fields, the following information is provided about each bit:
• Bit number and signal name
• Meaning for signal states 0 and 1
• Function diagram (optional)

Dependency

Conditions that must be fulfilled in conjunction with this parameter. Also includes special effects
that can occur between this parameter and others.
Where necessary, "Refer to:" indicates the following information:
• List of other relevant parameters to be considered.
• List of faults and alarms to be considered.

Safety guidelines

Important information that must be observed to avoid the risk of physical injury or material
damage.
Information that must be observed to avoid any problems.
Information that the user may find useful.
Danger
Warning
SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
The adjustment range and unit apply to all indices.
When all indices have the same factory setting, index 0 is specified with the unit to
represent all indices.
When the indices have different factory settings, they are all listed individually with the unit.
The signal is shown in this function diagram.
The description of this safety notice can be found at the beginning of this
manual, see "Legal information" (Page 4).
The description of this safety notice can be found at the beginning of this
manual, see "Legal information" (Page 4).
2 Parameters
2.1 Overview of parameters
29